Addonics M2HU9HS-2S Especificaciones descargar pdf (Pagina 8)

Advanced Setup Options

12-01. Read Error Skip

Allows duplicator to ignore I/O errors while reading source drive. Default setting is OFF.

12-02. Update Firmware

Used to apply firmware updates. Connect a drive formatted as FAT containing one partition

with the firmware file in the root directory.

NOTE: This function scans the entire disk before proceeding. Providing a drive that is as

small as possible is strongly recommended.

12-03. Compare Firmware

Used to confirm correct firmware. Connect a drive formatted as FAT containing one

partition with the firmware file in the root directory.

NOTE: This function scans the entire disk before proceeding. Providing a drive that is as

small as possible is strongly recommended.

12-04. Quick Erase HDD

Scans the ports, then quickly erases all sectors on all connected drives.

12-05. Full Erase HDD

Scans the ports, then completely erases all sectors on all connected drives.

12-06. H/W Diagnostic

Starts comprehensive tests for Ram, LCD, buttons, ports and Flash.

12-07. Load Default

Resets all configuration settings to default.

12-08. Copy HPA

Enables copy functions to duplicate the source drive's Host Protected Area. Normally this

area is defined as not available to a host controller as defined by ATA/SATA specifications.

12-09. Burn In

Runs a function continuously until aborted. Selections are Copy & Compare, Compare,

Async Cpy & Cmp, Async Compare.

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

1 2 3 4 5 6 7 8

Sin comentarios

Addonics M2HU9HS-2S Especificaciones Pagina 8